huawei p10 clone mt6580 hang on logo flashing done

GSM-Forum

huawei p10 clone mt6580 hang on logo flashing done

HUAWEI P10 MT6580 CLONE FLASHING DONE BY NCKBOX

Code:

Flash files count is :11
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKBox AndroidMTK 1.8.9.3
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM7)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000      [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Send preloader...
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.