GSM-Forum
MOTO C XT1750 dead
I have motorola c turned off because of bad flashing.
and I have the DA and the auth.
but it gives the same error.
ROM used --> XT1750_WATSON_50_NRD90M.045_subsidy-UNLOCKED_CFC.xml
out DA and AUTH
With DA y AUTH
With Rom --> WATSON_50_NRD90M.049_subsidy-UNLOCKED_CFC.xml
DA and AUTH
All same error
have two cell for test.
and I have the DA and the auth.
but it gives the same error.
ROM used --> XT1750_WATSON_50_NRD90M.045_subsidy-UNLOCKED_CFC.xml
out DA and AUTH
Quote:
Flash files count is :11 Action : Firmware update. Selected Model: Motorola: XT1750 Exe version: NCKDongle AndroidMTK 2.5.9.2 Scenario: [0]Safe Flash Custom auth file added ok Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek USB Port (COM8) Boot mode: Brom BBCHIP: 6580 0 ca00 Using Algo 1. Scatter file loaded, not need emmi. Phone detected...Please wait Sending DA agent, please wait... First stage DA fail, aborting BBCHIP MT6580 [SECURE BOOT]Not supported by exe or wrongly selected, aborting If model is listed, please select correct model If model is not listed, use custom DA from phone firmware Boot Fail.!!!. All done. |
With DA y AUTH
Quote:
Flash files count is :11 Action : Firmware update. Selected Model: Motorola: XT1750 Exe version: NCKDongle AndroidMTK 2.5.9.2 Scenario: [0]Safe Flash Custom auth file added ok Will be used loader: DA_SWSEC_WAT.bin Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek USB Port (COM8) Boot mode: Brom BBCHIP: 6580 0 ca00 Using Algo 1. Scatter file loaded, not need emmi. Phone detected...Please wait Sending DA agent, please wait... First stage DA fail, aborting BBCHIP MT6580 [SECURE BOOT]Not supported by exe or wrongly selected, aborting If model is listed, please select correct model If model is not listed, use custom DA from phone firmware Boot Fail.!!!. All done. |
With Rom --> WATSON_50_NRD90M.049_subsidy-UNLOCKED_CFC.xml
DA and AUTH
Quote:
Flash files count is :11 Action : Firmware update. Selected Model: Motorola: XT1750 Exe version: NCKDongle AndroidMTK 2.5.9.2 Scenario: [5]Full format + Full Flash Custom auth file added ok Will be used loader: DA_SWSEC.bin Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek USB Port (COM8) Boot mode: Brom BBCHIP: 6580 0 ca00 Using Algo 1. Scatter file loaded, not need emmi. Phone detected...Please wait Sending DA agent, please wait... First stage DA fail, aborting BBCHIP MT6580 [SECURE BOOT]Not supported by exe or wrongly selected, aborting If model is listed, please select correct model If model is not listed, use custom DA from phone firmware Boot Fail.!!!. |
have two cell for test.
Aucun commentaire:
Enregistrer un commentaire