jeudi 16 août 2018

LG_D325 Smart repair emmc Successfully

GSM-Forum
LG_D325 Smart repair emmc Successfully

Code:
Welcome to Medusa Pro Software version 1.6.3.
Started.
Reader #0: Generic EMV Smartcard Reader 0

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand    : LG
Model    : D325
SRF      : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_D325_EMMC.SRF
Voltage  : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device      : Samsung eMMC K5XVMB
Page size    : 512 B
Block size  : 512 B
Block count  : 7634944
Size        : 3728.00 MB
---------------------------------------------------------------
CID Info

CID                  : 1501004B3558564D42062CBD529E318F
Manufacturer ID      : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : K5XVMB
Full name            : KMK5X000VM-B314
Product revision      : 0.6
Product serial number : (hex) 2CBD529E
Manufacturing date    : 03/2014
---------------------------------------------------------------
CSD Info

CSD                  : D02701320F5903FFF6DBFFEF8E40400D
CSD structure        : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length    : 512 Bytes
WP group enable      : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT    : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size            : 512 Kbytes

Partition config      : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions  : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions  : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode            : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1269760 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size  : 0 b
GP partition 2 size  : 0 b
GP partition 3 size  : 0 b
GP partition 4 size  : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start  : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Ok

Disk/Image size      : e9000000 bytes
Device sector size    : 512 bytes
Partition offset      : 770048
Number of sectors    : 3070976
Device Manufacturer  :lge
Device Platform      :msm8610
Build ID              :KOT49I.A1411471607
Display Build ID      :KOT49I.A1411471607
Release ID            :4.4.2
Device Model          :LG-D325
Device Name          :w5ds_global_com
Architecture ABI      :armeabi-v7a
Architecture ABI2    :armeabi
Build Description    :w5ds_global_com-user 4.4.2 KOT49I.A1411471607 1411471607 release-keys

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/K5XVMB_16_08_2018_02_27_08.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.3; FW: 1.24.
P00: GPT              (00000000, 00002000)        4 MB
P01: modem            (00002000, 00020000)        64 MB
P02: sbl1            (00022000, 00000800)        1024 KB
P03: rpm              (00022800, 00000400)        512 KB
P04: tz              (00022C00, 00000400)        512 KB
P05: sdi              (00023000, 00000400)        512 KB
P06: aboot            (00023400, 00001000)        2048 KB
P07: rpmb            (00024400, 00000400)        512 KB
P08: tzb              (00024800, 00000400)        512 KB
P09: abootb          (00024C00, 00001000)        2048 KB
P10: pad              (00025C00, 00001000)        2048 KB
P11: modemst1        (00026C00, 00001800)        3072 KB
P12: modemst2        (00028400, 00001800)        3072 KB
P13: misc            (00029C00, 00008000)        16 MB
P14: persist          (00032000, 00010000)        32 MB
P15: laf              (00042000, 0000B000)        22 MB
P16: boot            (0004E000, 0000B000)        22 MB
P17: recovery        (00059000, 0000B000)        22 MB
P18: fsg              (00064000, 00001800)        3072 KB
P19: fsc              (00066000, 00000400)        512 KB
P20: ssd              (00066400, 00000400)        512 KB
P21: DDR              (00068000, 00000400)        512 KB
P22: encrypt          (0006A000, 00000400)        512 KB
P23: rct              (0006A400, 00000400)        512 KB
P24: drm              (0006C000, 00004000)        8 MB
P25: sns              (00070000, 00004000)        8 MB
P26: factory          (00074000, 0000A000)        20 MB
P27: fota            (0007E000, 00010000)        32 MB
P28: sbl1b            (0008E000, 00000800)        1024 KB
P29: mpt              (0008E800, 00010000)        32 MB
P30: cust            (000A0000, 00019000)        50 MB
P31: eksst            (000BA000, 00000400)        512 KB
P32: system          (000BC000, 002EDC00)        1500 MB
P33: cache            (003A9C00, 0007D000)        250 MB
P34: userdata        (00426C00, 00310000)        1568 MB
P35: grow            (00738000, 0000FFDF)        31.98 MB
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/LG_D325_EMMC.SRF".
Write data verification is enabled.
Writing GPT partition...        Done.
Writing modem partition...        Done.
Writing sbl1 partition...        Done.
Writing rpm partition...        Done.
Writing tz partition...        Done.
Writing sdi partition...        Done.
Writing aboot partition...        Done.
Writing rpmb partition...        Done.
Writing tzb partition...        Done.
Writing abootb partition...        Done.
Writing pad partition...        Done.
Writing modemst1 partition...        Done.
Writing modemst2 partition...        Done.
Writing CustomMisc partition...        Done.

Smart Repair is successfully complete.
SW: 1.6.3; FW: 1.24.
Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand    : LG
Model    : D325
SRF      : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_D325_EMMC.SRF
Voltage  : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device      : Samsung eMMC K5XVMB
Page size    : 512 B
Block size  : 512 B
Block count  : 7634944
Size        : 3728.00 MB
---------------------------------------------------------------
CID Info

CID                  : 1501004B3558564D42062CBD529E318F
Manufacturer ID      : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : K5XVMB
Full name            : KMK5X000VM-B314
Product revision      : 0.6
Product serial number : (hex) 2CBD529E
Manufacturing date    : 03/2014
---------------------------------------------------------------
CSD Info

CSD                  : D02701320F5903FFF6DBFFEF8E40400D
CSD structure        : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length    : 512 Bytes
WP group enable      : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT    : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size            : 512 Kbytes

Partition config      : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions  : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions  : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode            : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1269760 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size  : 0 b
GP partition 2 size  : 0 b
GP partition 3 size  : 0 b
GP partition 4 size  : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start  : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Ok

Disk/Image size      : e9000000 bytes
Device sector size    : 512 bytes
Partition offset      : 770048
Number of sectors    : 3070976
Device Manufacturer  :lge
Device Platform      :msm8610
Build ID              :KOT49I.A1411471607
Display Build ID      :KOT49I.A1411471607
Release ID            :4.4.2
Device Model          :LG-D325
Device Name          :w5ds_global_com
Architecture ABI      :armeabi-v7a
Architecture ABI2    :armeabi
Build Description    :w5ds_global_com-user 4.4.2 KOT49I.A1411471607 1411471607 release-keys

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/K5XVMB_16_08_2018_02_29_23.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.3; FW: 1.24.
P00: GPT              (00000000, 00002000)        4 MB
P01: modem            (00002000, 00020000)        64 MB
P02: sbl1            (00022000, 00000800)        1024 KB
P03: rpm              (00022800, 00000400)        512 KB
P04: tz              (00022C00, 00000400)        512 KB
P05: sdi              (00023000, 00000400)        512 KB
P06: aboot            (00023400, 00001000)        2048 KB
P07: rpmb            (00024400, 00000400)        512 KB
P08: tzb              (00024800, 00000400)        512 KB
P09: abootb          (00024C00, 00001000)        2048 KB
P10: pad              (00025C00, 00001000)        2048 KB
P11: modemst1        (00026C00, 00001800)        3072 KB
P12: modemst2        (00028400, 00001800)        3072 KB
P13: misc            (00029C00, 00008000)        16 MB
P14: persist          (00032000, 00010000)        32 MB
P15: laf              (00042000, 0000B000)        22 MB
P16: boot            (0004E000, 0000B000)        22 MB
P17: recovery        (00059000, 0000B000)        22 MB
P18: fsg              (00064000, 00001800)        3072 KB
P19: fsc              (00066000, 00000400)        512 KB
P20: ssd              (00066400, 00000400)        512 KB
P21: DDR              (00068000, 00000400)        512 KB
P22: encrypt          (0006A000, 00000400)        512 KB
P23: rct              (0006A400, 00000400)        512 KB
P24: drm              (0006C000, 00004000)        8 MB
P25: sns              (00070000, 00004000)        8 MB
P26: factory          (00074000, 0000A000)        20 MB
P27: fota            (0007E000, 00010000)        32 MB
P28: sbl1b            (0008E000, 00000800)        1024 KB
P29: mpt              (0008E800, 00010000)        32 MB
P30: cust            (000A0000, 00019000)        50 MB
P31: eksst            (000BA000, 00000400)        512 KB
P32: system          (000BC000, 002EDC00)        1500 MB
P33: cache            (003A9C00, 0007D000)        250 MB
P34: userdata        (00426C00, 00310000)        1568 MB
P35: grow            (00738000, 0000FFDF)        31.98 MB

Aucun commentaire:

Enregistrer un commentaire